Shop
Showing 28–54 of 54503 results
-
Brake Fluid
1 250ml bottle of EBC Brakes DOT-4 glycol fluid
1 250ml bottle of EBC Brakes DOT-4 glycol fluid has a dry boiling point of 268C (514F) and a minimum wet boiling point of 165C (329F) for most modern motorcycle and automotive brake systems. CANNOT be mixed with Dot 5 silicone fluids.
- Wet boiling point is referred to oil with 3.7% or higher concentration of water.
- Because brake fluid is hygroscopic EBC recommends checking and replacing often.
- Do no mix with synthetic brake fluid.
- Ideal for performing a full system flush on a daily driven street car
- Dry boiling point of 270 C (518 F), wet boiling point of 170 C (338 F)
(0 reviews) -
Brake Fluid
1 250ml bottle of EBC Brakes DOT-5 silicone based fluid.
1 250ml bottle of EBC Brakes DOT-5 silicone based fluid has a typical dry boiling point of 572F and a typical wet boiling point of 356F for use in hydraulic brake and clutch systems of all cars, commercial vehicles and motorcycles.
- Particularly recommended for classic cars or vehicles that are garaged for much of their life, but be usable at short notice
- Dry boling point of 300 C (572 F), wet boiling point of 180 C (356 F)
- Silicone fluid does not absorb water from the surrounding atmosphere while in service and therefore offers greatly extended service life.
- Polydimethylsiloxanes (silicone) offers many advantages over conventional glycol based fluids.
- This fluid must only ever be mixed with DOT 5 fluid which has the same silicone base. Never mix DOT 5 with regular glycol based fluids.
(0 reviews) -
Brake Fluid
1 500ml bottle of highly refined DOT-4 racing brake fluid.
1 500ml bottle of highly refined DOT-4 racing brake fluid. BF-307 has a higher wet and dry boiling point I deal for street and track use.
- Dot-4 compliant, can be mixed with Dot-4
- Dry boiling point of 307 C (585 F), wet boiling point of 185 C (365 F)
- Wet boiling point is referred to oil with 3.7% or higher concentration of water.
- Because brake fluid is hygroscopic EBC recommends checking and replacing often.
- Do no mix with synthetic brake fluid.
(0 reviews) -
Manifold Absolute Pressure Sensor
1 Bar Map Sensor Kit with Ford TPS
This MAP Sensor kit contains TPS 307005, MAP 307007, CTS 307003 and ATS 307004. Use 308031 to adapt this sensor to a late model harness like EZ 2.0 or XFI Sportsman
(0 reviews) -
Manifold Absolute Pressure Sensor
1 BAR Map Sensor Kit with GM TPS
This MAP Sensor kit contains TPS 307006, MAP 307007, CTS 307003 and ATS 307004. Use 308031 to adapt this sensor to a late model harness like EZ 2.0 or XFI Sportsman
(0 reviews) -
Manifold Absolute Pressure Sensor
1 Bar Map Sensor with 3 Weatherpack Female Terminals
This MAP sensor has 3 weatherpack female terminals. Reads up to 14.5 PSI. Use 308031 to adapt this sensor to a late model harness like EZ 2.0 or XFI Sportsman
- Reads up to 14.5 PSI
(0 reviews) -
Battery Jumper Cable
1 GA., 25 FT Booster Cable, 800A HD Clamp
- 25′ length
- 1 GA cable set
- Single cable design
- 800A HD clamp set
- All weather rated to -40?C.
- 1 Year Limited Warranty
(0 reviews) -
Suspension Lift Kit
1 Inch Leveling Kit – Coil Spacer – Ford F250/F350 Super Duty (05-16) 4WD
05-16 F250-F350 Gas-Diesel engine 1-0 Leveling Kit
- Easy 100% Bolt-on installation
- Maintains factory like ride quality
- Standard NX2 Nitro shocks with vehicle-specific valving for better control
- Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
(0 reviews) -
Suspension Lift Kit
1 Inch Leveling Kit – Coil Spacer – Ford F250/F350 Super Duty (05-16) 4WD
05-16 F250-F350 Gas-Diesel engine 1-0 Leveling Kit
- Easy 100% Bolt-on installation
- Maintains factory like ride quality
- Standard NX2 Nitro shocks with vehicle-specific valving for better control
- Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
(0 reviews) -
Brake Fluid
1 liter bottle of EBC Brakes DOT-4 glycol fluid.
1 liter bottle of EBC Brakes DOT-4 glycol fluid has a dry boiling point of 268C (514F) and a minimum wet boiling point of 165C (329F) for most modern motorcycle and automotive brake systems. CANNOT be mixed with Dot 5 silicone fluids.
- Ideal for performing a full system flush on a daily driven street car
- Dry boiling point of 270 C (518 F), wet boiling point of 170 C (338 F)
- Wet boiling point is referred to oil with 3.7% or higher concentration of water.
- Because brake fluid is hygroscopic EBC recommends checking and replacing often.
- Do no mix with synthetic brake fluid.
(0 reviews) -
Brake Fluid
1 liter of highly refined DOT-4 racing brake fluid.
1 liter of highly refined DOT-4 racing brake fluid. BF-307 has a higher wet and dry boiling point I deal for street and track use.
- Dry boiling point of 307 C (585 F), wet boiling point of 185 C (365 F)
- Wet boiling point is referred to oil with 3.7% or higher concentration of water.
- Because brake fluid is hygroscopic EBC recommends checking and replacing often.
- Do no mix with synthetic brake fluid.
- Dot-4 compliant, can be mixed with Dot-4
(0 reviews) -
Hand Punch
1 Pin Weatherpack Connector Kit
1 Pin Weatherpack Connector Kit comes with terminals, seals and connectors to build sealed connection.
(0 reviews)