Armordillo 2008-2016 Nissan Rogue Class 3 Black Trailer Hitches

Installation Guide and Tips

Tools You’ll Need

Before beginning the installation, gather the necessary tools to ensure a smooth and efficient process. Having all the required tools readily available will help minimize delays and ensure the hitch is correctly installed. Make sure you have the following tools at your disposal:

• Wrench set (metric)
• Torque wrench
• Socket set
• Safety glasses
• Gloves
• Jack and jack stands (for safely lifting the vehicle)

Step-by-Step Installation Instructions

Follow these step-by-step instructions to install your Armordillo Class 3 trailer hitch on your 2008-2016 Nissan Rogue. Refer to the included diagrams or consult the manufacturer’s instructions for precise bolt locations and torque specifications. Always double-check all connections after installation to ensure they are secure.

1. Prepare the vehicle by safely raising it using a jack and securing it with jack stands. Ensure the vehicle is on a level surface and the parking brake is engaged.
2. Locate the factory mounting points on the vehicle’s frame. These are typically pre-drilled holes designed to accept the hitch’s mounting brackets.
3. Position the hitch assembly under the vehicle, aligning it with the mounting points. It may be helpful to have an assistant to support the hitch during this step.
4. Attach the hitch to the frame using the provided bolts and washers. Start by hand-tightening all bolts to ensure proper alignment.
5. Once the hitch is properly aligned, tighten the bolts to the manufacturer’s specified torque values, using a torque wrench. Refer to the instructions for the specific torque settings.
6. After tightening the bolts, double-check all connections to ensure they are secure.
7. Lower the vehicle and remove the jack stands.

Safety Precautions

Prioritize safety throughout the installation process. Proper safety precautions are crucial to avoid injury and ensure the hitch is installed correctly. Always adhere to these guidelines:

• Always wear safety glasses and gloves to protect your eyes and hands.
• Use jack stands to support the vehicle; never work under a vehicle supported only by a jack.
• Ensure all bolts are tightened to the manufacturer’s specified torque values. Over-tightening or under-tightening can compromise the hitch’s performance and safety.
• If you are not comfortable with any part of the installation process, consult a professional mechanic.