Armordillo 1999-2005 Volkswagen Jetta Sedan (8Th Vin Digit = M) ( Drilling Required) Class 1 Black Trailer Hitches

Detailed Installation Guide

Tools and Materials Required

Before starting the installation, gather all necessary tools, hardware, and safety equipment. This will ensure a smooth and efficient installation process. Having all the required items readily available will save time and prevent interruptions.

• List of required tools (drill, wrenches, etc.): Drill with drill bits, various wrenches (metric), torque wrench, measuring tape, safety glasses, and gloves.
• Type and size of bolts, nuts, and washers: The hitch comes with all necessary hardware; confirm sizes before starting.
• Safety equipment (gloves, eye protection): Always wear safety glasses and work gloves during installation.

Step-by-Step Installation Instructions

Follow these detailed instructions to install the Armordillo trailer hitch on your Volkswagen Jetta. If you are not confident in your ability to install the hitch, consult a professional.

1. Step 1: Prepare the vehicle (e.g., safety measures, jack up): Park the Jetta on a level surface, engage the parking brake, and disconnect the negative battery cable. If necessary, raise the rear of the vehicle using jack stands for easier access.
2. Step 2: Locate mounting points: Identify the pre-existing mounting points on the vehicle’s frame. These are typically located on the underside of the car, near the rear bumper.
3. Step 3: Drilling instructions (if applicable): If the mounting points do not align perfectly, use a drill to create new holes according to the hitch’s instructions. Make sure to measure carefully and use the correct drill bit size.
4. Step 4: Attaching the hitch: Raise the hitch into position, aligning the mounting holes with the vehicle’s frame.
5. Step 5: Tightening bolts: Insert the provided bolts and washers through the hitch and into the mounting points. Tighten the bolts by hand first, then use a torque wrench to tighten them to the manufacturer’s specified torque.
6. Step 6: Wiring (if applicable): If you plan to connect trailer lights, install the wiring harness according to the included instructions.
7. Step 7: Safety checks: After installation, double-check all bolts to ensure they are securely tightened. Test the trailer lights (if applicable) and ensure they are functioning correctly.

Important Notes and Safety Tips

Follow these safety precautions and tips to ensure a safe and successful installation of the Armordillo trailer hitch. Safety is paramount during any mechanical work, and taking the necessary precautions can prevent accidents and ensure your safety.

• Torque specifications for bolts: Always use a torque wrench to tighten the bolts to the manufacturer’s recommended torque specifications.
• Safety reminders (e.g., working on a level surface, using jack stands): Work on a level surface and always use jack stands to support the vehicle when raising it.
• Recommendations for professional installation if needed: If you are not comfortable with the installation process, consider having the hitch installed by a professional.